Salt Spray Cyclic Tester

• Customization: Available
• Certification: CE, ISO
• Warranty: 1 Year
• Model NO.: AC-90B
• Transport Package: Wooden Case
• Specification: 900*600*500mm
• Trademark: SUZHOU QIANTONG
• Origin: Jiangsu, China
• HS Code: 9024800000
• Production Capacity: 1000 Set/Year

Product Description

1. Qiantong main scope of testing machine

Electronic universal material testing machine, Horizontal tension testing machine, Hydraulic universal testing machine, MFI, Charpy Impact, Izod Impact, HDT-Vicat tester, Hardness tester, Torsion tester, Metallographic series, Oven and so on. (We accept customization.)

2. Product

Brief:The Salt spray tester is used to test the capacity of material and its protective layer to salt spray corrosion, as well as to compare the process quality of similar protective layer. It can also be used to test the salt spray corrosion resistance of some products. It can test the corrosion resistance after corrosion treatment for kinds of material surface treatment, such as coating, electroplating, organic and inorganic coatings, anodic treatment, rustproof oil and so on. Thus it can ensure the products quality. And the product is used to salt spray corrosion test of parts, electronic components, protective coating of metal material and industry products.

Principle:The salt spray tester adopts the method of salts spray corrosion to inspect the corrosion resistance about reliability of sample respectively. The salt spray refers to dispersion system which composed of tiny saline droplets in the atmosphere. It is one of the three defense series of artificial environment. Many enterprises need to simulate the damage caused by climate around the ocean, so the salt spray tester appears

3. Specifications

Type	AC-60B	AC-90B	AC-120B
Salt spray test	NSS  ACSS	NSS  ACSS	NSS  ACSS
Laboratory temperature	35ºC±1ºC	35ºC±1ºC	35ºC±1ºC
Temperature fluctuation	≤±1.0ºC	≤±1.0ºC	±0.5ºC
Temperature uniformity	≤2ºC	≤2ºC	±2ºC
Pressure air bucket temperature	47ºC±1ºC	47ºC±1ºC	47ºC±1ºC
Working time	more than 1000h	more than 1000h	more than 1000h
Inner size(L*W*H)mm	600*450*400	900*600*500	1200*1000*500
Shape size(L*W*H)mm	1070*700*1080	1400*850*1080	1700*1200*1450
Power	single phase220V  2kW 50Hz	single phase220V  2kW 50Hz	3KW

4. Protective devices

1. When the water is low, it can automatically cut the power down, the safety warning lamp displays
2. When the temperature is over, it can automatically cut off the heat power, the safety warning lamp displays
3. When the salt water level is low, the safety warning device lights up and alarms.
4. Leakage protection: prevent personal injury and instrument fault caused by circuit leakage or short circuit.
5. Technology basic:according to JIS,ASTM,CNS,GB standard parameters operation setting.
6. Sample holder is made of 5mm heat-resistant PVC board with strong load-bearing capacity. The test sample holder adopts plane dividing type, which can adjust the angle arbitrarily. The fogging on all side is uniform. And it is completely consistent. The test results are accurate and the number of test sample is large.(it can be customized by client's products)

 

FAQ
Q:Are you a trade company or factory?
A:Our company is a factory and directly sales.
Q:Can your company accept customization?
A: Yes. Our machines can be customized by client.
Q:How to guarantee your after-sales service?
A:Our philosophy is one year warranty and lifetime service. After the warranty period is exceeded, if there is any problem, we will provide support for you in time. (only charge travel expense and parts cost at most.)
Q:How to install and operate?
A:We will give a U disk with operating video. About the installing, just plug in and use.
Q:Do you have other testers?
A:Sure. If there is no machines which can make you satisfied. We can give you the catalogue of complete products by email.